LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Viper ACR >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery HOLDDOWN >> Installation

Battery HOLDDOWN: Installation

  1. Install the battery hold down in the vehicle.
  2. Install the single battery hold down retaining fastener. Torque the bolt to 14 N.m (124 in. lbs.).
  3. Connect the negative battery cable.
  4. Install the seven screws attaching the rear wheel splash shield.
  5. Install the left rear tire and wheel (Refer to WHEELS - INSTALLATION ).
scientia non olet · About LEMON Manuals