LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Durango R/T, 4.7 N >> Repair and Diagnosis >> Electrical >> Starter >> Starting Systems >> Starter Motor >> Installation >> 4.7L Engine

4.7L Engine

  1. Position starter motor to transmission housing.
  2. Connect battery cable solenoid terminal wire harness connector to connector receptacle on starter solenoid. Always support the starter motor during this process. Do not let the starter motor hang from the wire harness.
  3. Install battery cable eyelet terminal onto solenoid B(+) terminal stud.
  4. Install and tighten nut securing battery cable eyelet terminal to starter solenoid B(+) terminal stud. Tighten nut to 13.6 N.m (120 in. lbs.).
  5. Position starter motor to transmission housing and loosely install two bolts/washers.
  6. Tighten bolts to 67.8 N.m (50 ft. lbs.).
  7. Lower vehicle.
  8. Connect negative battery cable.
scientia non olet · About LEMON Manuals