LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> Steering >> Steering Column >> Gear Shift Lever >> Installation

Gear Shift Lever: Installation

  1. Install the gear shift lever onto the steering column assembly. (Figure).
  2. Install the shift lever screws. Tighten the screws to 12 N.m (105 In. Lbs).
  3. Connect the shift cable to the pin ensuring the shift lever is in PARK and snap the shift cable adjustment clip in place.
  4. Connect over drive switch wiring.
  5. Install the upper and lower shrouds.
  6. Tighten the steering column mounting nuts to 28 N.m (250 In. Lbs).
  7. Install the kneeblocker.
scientia non olet · About LEMON Manuals