LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling >> Engine Coolant Temperature Sensor >> Installation >> Installation - 4.7L

Installation - 4.7L

  1. Install sensor.
  2. Tighten to 11 N.m (8 ft. lbs.) torque.
  3. Connect electrical connector to sensor.
  4. Replace any lost engine coolant. (Refer to STANDARD PROCEDURE - ADDING ADDITIONAL COOLANT ).
scientia non olet · About LEMON Manuals