LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Quick Lookups >> Common Specs & Procedures >> Specifications Index

Specifications Index

DURANGO SPECIFICATIONS INDEX

System Specification/Procedure
Air Conditioning
Automatic A/C
Service SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Manual A/C
Service SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Axle Nut/Hub Nut
2WD 180 Ft. Lbs. (244 N.m)
4WD 185 Ft. Lbs. (251 N.m)
Battery BATTERY SYSTEM
Brakes
Bleeding Sequence
With ABS STANDARD PROCEDURE
Without ABS BLEEDING BRAKE SYSTEM
Disc Brakes DISC BRAKE SPECIFICATIONS
Drum Brakes DRUM BRAKE SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Charging
Generator GENERATOR APPLICATIONS
Torque TORQUE SPECIFICATIONS
Drive Belts
Adjustment BELT ADJUSTMENT
Belt Routing BELT ROUTING
Engine Cooling
General Service Specifications SPECIFICATIONS
Radiator Cap Pressure 18-21 psi
Thermostat R & I
4.7L ENGINE COOLANT THERMOSTAT - 4.7L
5.9L ENGINE COOLANT THERMOSTAT - 5.9L
Water Pump R & I
4.7L WATER PUMP - 4.7L
5.9L WATER PUMP - 5.9L
Engine Mechanical
Compressions ENGINE COMPRESSION
Oil Pressure
4.7L Oil pressure is 4 psi (.3 kg/cm2 ) at idle, and 25-80 psi (1.7-5.6 kg/cm2 ) at 3000 RPM with engine at normal operating temperature.
5.9L (CAUTION: If oil pressure is zero at curb idle, DO NOT rune engine at 3000 RPM.) Oil pressure at curb idle (minimum) is 6 psi (41.4 kPa). Oil pressure at 3000 RPM is 30-80 psi (207-552 kPa).
Overhaul
4.7L ENGINE SPECIFICATIONS
5.9L 5.9L ENGINE SPECIFICATIONS
Torque
4.7L TORQUE SPECIFICATIONS
5.9L TORQUE SPECIFICATIONS
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Drive Plate/Flex Plate Torque
4.7L 45 Ft. Lbs. (60 N.m)
5.9L 55 Ft. Lbs. (75 N.m)
Fuel System
Fuel Filter Location FUEL FILTER
Pressure Specification FUEL PUMP (GASOLINE)
Fuel Pressure Test Procedure FUEL DELIVERY
Fuel Pressure Release FUEL SYSTEM PRESSURE RELEASE
Ignition
Firing Order & Cylinder Identification FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Resistance) HIGH TENSION WIRE RESISTANCE
Ignition Wires (Routing) FIRING ORDER . Wire routing may be located in Figures.
Spark Plugs SPARK PLUGS
Starting
Starter SPECIFICATIONS - STARTING SYSTEM
Torque SPECIFICATIONS - TORQUE - STARTING SYSTEM
Wheel Alignment
Adjustment Specifications ALIGNMENT SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Wheel & Tire
Lug Nut Torque 85-116 Ft. Lbs. (115-157 N.m)