LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Caravan EC >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Wiring Voltage Test

Wiring Voltage Test

  1. Remove the power window switch and bezel assembly from the driver door. See POWER WINDOW SWITCH  under REMOVAL & INSTALLATION.
  2. Disconnect wire connector from back of power window switch.
  3. Turn ignition switch to ON position.
  4. Connect the clip end of a 12-volt test light to pin No. 13 in door harness connector at the window switch. Touch the test light probe in pin No. 9 and then to pin No. 11. If the test light illuminates, the wiring circuit between the battery and switch is OK. If the lamp does not illuminate, first check the 25-amp circuit breaker attached to the electrical distribution wiring bracket. If the circuit breaker is OK, then check the 40-amp fuse No. 28 in the Integrated Power Module (IPM). If both components are OK, then check for a broken wire. See WIRING DIAGRAMS  .
scientia non olet · About LEMON Manuals