LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Caravan EC >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Vent Window Motor

Vent Window Motor

  1. Remove "D" pillar trim panel. See "D" PILLAR TRIM PANEL  under REMOVAL & INSTALLATION.
  2. Disconnect power vent window motor wire connector from body harness.
  3. Using 2 jumper wires, connect one to a battery (+) source and the other to a good ground (-).
  4. Connect the negative (-) jumper probe to one of the motor connector terminals.
  5. Momentarily touch the positive (+) jumper probe to the other motor connector terminal. When the positive probe is connected, the motor should rotate in one direction to either move window open of closed. If window is all the way open or closed the motor will grunt and the crank system will flex when actuated in the one direction. Reverse jumper probes at the motor connector terminals and window should now move in the opposite position to verify full operation. If motor grunts and does not move with the motor connected in both directions, verify that crank system is not binding.
scientia non olet · About LEMON Manuals