Test No. 6: Power Window Timer Function Does Not Operate Properly
- If scan tool is available, connect scan tool to Data Link Connector (DLC). See Figure
. If scan tool is not available, connect analog voltmeter between DLC terminal No. 4 or 5 and terminal No. 9. See Fig 1
. Perform input signal check and verify operation of ignition switch (IGN 1) and driver's and passenger's door switch input signals. See INPUT SIGNAL CHECK under SYSTEM TESTS in BODY CONTROL MODULES - SEBRING COUPE & STRATUS COUPE article. If input signals operate properly, go to next step. If input signals do not operate properly, diagnose and repair as directed by INPUT SIGNAL VERIFICATION table under SYSTEM TESTS in BODY CONTROL MODULES - SEBRING COUPE & STRATUS COUPE article.
- Replace front ECU. Recheck operation of power window timer function. If power window timer function operates properly, repair is complete. If power window timer function does not operate properly, replace ETACS ECU. Recheck operation of power window timer function.
Courtesy of DAIMLERCHRYSLER CORP.