Low Beam Headlights Will Not Turn Off
- Ensure headlight switch is in OFF position. Disconnect Black 14-pin headlight switch connector. See Figure . Connect a fused jumper wire between ground and Black 14-pin headlight switch connector terminal No. 2 (White/Dark Green wire). See Figure . If low beam headlights do not turn off, go to next step. If low beam headlights turn off, go to step 3 .
- Repair short to ground in White/Dark Green wire between Black 14-pin headlight switch connector terminal No. 2 and Gray 26-pin Central Timer Module (CTM) connector C1 terminal No. 23. See Figure .
- Disconnect Gray 26-pin Central Timer Module (CTM) connector C1. CTM is located behind left side kick panel. Using DVOM, measure resistance of White/Dark Green wire between Gray 26-pin CTM connector C1 terminal No. 23 and Black 14-pin headlight switch connector terminal No. 2. See Figure . If resistance is 5 ohms or less, replace CTM. See CENTRAL TIMER MODULE under REMOVAL & INSTALLATION. If resistance is more than 5 ohms, replace headlight switch. See HEADLIGHT SWITCH under REMOVAL & INSTALLATION.