LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2001 >> Durango 5.9 Z, RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Programming >> Sentry Keys >> Customer Learn Method

Customer Learn Method

  1. Obtain 2 programmed sentry keys from vehicle owner. Ensure new sentry key blank is cut before proceeding. Insert one of the 2 valid sentry keys into ignition switch. Turn ignition on.
  2. After 3 seconds, but no more than 15 seconds, turn ignition off. Remove key. Insert second valid sentry key. Turn ignition on.
  3. About 10 seconds after completion of previous step, Vehicle Theft Security System (VTSS) Light Emitting Diode (LED) indicator will flash and a single tone will be heard. This indicates system has entered customer learn programming mode.
  4. Within 50 seconds, turn ignition off. Remove second valid sentry key. Insert blank sentry key. Turn ignition on. After about 10 seconds, a single tone will be heard. VTSS LED indicator will stop flashing and stay on for about 3 seconds to indicate sentry key has been successfully programmed.
  5. SKIS will return to normal operation immediately following exit from customer learn programming mode. Repeat procedure for each additional sentry key to be programmed.
scientia non olet · About LEMON Manuals