LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2000 >> Intrepid ES, 3.2 J >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Motor >> Removal & Installation

Removal & Installation

  1. Raise window to full-up position, if possible. Disconnect battery. Remove door trim panel. See DOOR TRIM PANEL  . Remove window regulator. See WINDOW REGULATOR  .
  2. Disconnect wire connector from motor. Using a "C" clamp, clamp sector gear to regulator mounting plate to prevent regulator movement. See Fig 1 .
  3. Remove motor from regulator. To install, reverse removal procedure. Tighten motor mounting screws to 50-70 INCH lbs. (5.6-8.0 N.m). Adjust window alignment, if necessary. See ADJUSTMENTS  .
Fig 1: Removing Window Motor
G95B13772Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals