LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2000 >> Durango 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Power Window Motor

Power Window Motor

NOTE: Window motor and regulator are serviced as an assembly.
  1. Disconnect negative battery cable. Remove door trim panel. See DOOR TRIM PANEL  under REMOVAL & INSTALLATION. Disconnect window motor connector. Using jumper wires, apply battery voltage to window motor terminals. Motor should operate, unless window is already at maximum travel.
  2. Reverse jumper wires. Window should move in opposite direction. If window does not move in either direction, replace window motor.
  3. If motor operates in one direction only, replace motor. See POWER WINDOW MOTOR  under REMOVAL & INSTALLATION. If motor grunts and does not move, disconnect window glass from regulator plate. Check window glass, tracks and regulator for sticking, binding or improper adjustment. Repair as necessary and recheck system operation.
scientia non olet · About LEMON Manuals