LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2000 >> Durango 5.2 Y >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self Diagnostics >> Diagnostic Tests >> Test NTC-3: Checking Brake Switch

Test NTC-3: Checking Brake Switch

NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION  . For wiring diagram, see WIRING DIAGRAMS article.

Turn ignition on with engine off. Using scan tool in INPUTS/OUTPUTS mode, read brake switch state while depressing and releasing brake pedal several times. If scan tool displays PRESSED and RELEASED, brake switch is operating properly. Test is complete. If scan tool does not display PRESSED and released, check wiring and connectors to brake switch as necessary.

scientia non olet · About LEMON Manuals