LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1999 >> Caravan Base, 2.4 B >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer - Tests >> Verification Tests >> Verification Test VER-1A

Verification Test VER-1A

  1. Reconnect all previously disconnected components and connectors. If Body Control Module (BCM) was replaced, you must enable the Vehicle Theft Security System (VTSS) or anti-theft system (if equipped) by using the key to unlock the liftgate while hood is open. If BCM was replaced you must program other options as necessary.
    NOTE: To enable automatic headlight operation, vehicle must be driven over 3 miles and BCM must see one key transmission from the remote keyless entry transmitter.
  2. Ensure ignition is on. Using scan tool, clears all DTCs. Turn ignition off and wait 5 seconds. Turn ignition on and fully operate system that was malfunctioning.
  3. If the system is operating properly, continue to the next step. If system is not operating properly, check possible causes for the malfunction.
  4. Using scan tool, read DTCs stored in the BCM. If no DTCs exist and customer's complaint cannot be duplicated, test is complete. If any DTCs exist, perform appropriate test for the DTC.
scientia non olet · About LEMON Manuals