Engine Block: Cleaning
CAUTION:
Remove all gasket material from cylinder block using a plastic gasket scraper and Mopar® Brake parts Cleaner or equivalent, this will prevent damage to cylinder block.
- When cleaning cylinder block, remove oil gallery plugs at front and rear of the block. Remove coolant core plugs on sides of the block. Spray compressed air into all oil gallery passages to ensure they are clear of blockage.
- Use a wooden or plastic scraper and Mopar® Brake Parts Cleaner or equivalent to remove old gasket. Use fine grade Scotch Brite or equivalent to remove any small amounts of gasket material. Clean oil passages in crankshaft with a brush.