LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1998 >> Intrepid Base, 2.7 R >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Controls - Tests W/Codes - 3.3L) >> Introduction >> System Diagnostics >> Intermittent Failures

Intermittent Failures

WARNING: This page is about a different car, the 1997 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.

Intermittent failures may cause MIL to flicker or illuminate and go out after intermittent failure goes away. However, corresponding diagnostic trouble code will be retained in PCM memory. If related failure does not reoccur within a certain time frame, related diagnostic trouble code will be erased from PCM memory. Intermittent failures may be caused by a sensor, connector or wiring related problems. See INTERMITTENTS in TESTS W/O CODES - 3.3L article.

scientia non olet · About LEMON Manuals