LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1998 >> Intrepid Base, 2.7 R >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - Tests W/Codes - 3.3L) >> Test VER-1 >> Verification Procedure

Verification Procedure

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change oil and filter if necessary. Attempt to start engine.
  2. If engine does not start, check if any Technical Service Bulletins (TSBs) apply to vehicle and return to TEST TC-1A  , if necessary.
  3. If engine starts and Powertrain Control Module (PCM) is changed, repair is complete.
  4. If engine starts and PCM is not changed, connect scan tool to data link connector and erase trouble codes. Repair is complete.
scientia non olet · About LEMON Manuals