Engine Controls - Service & Adjustment Specifications - 2.7L: Capacities

BATTERY SPECIFICATIONS

Application & Group		Cold Cranking Amps	Amp Hr. Rating
Concorde & Intrepid
(Group 34)		500	60

FLUID CAPACITIES

Application

⁽¹⁾ Quantity

Crankcase (Includes Filter) ⁽²⁾

5.5 Qts. (5.2L)

Cooling System ⁽³⁾

8.0 Qts. (7.5L)

Automatic Transaxle (Mopar ATF Plus Type 7176)

Drain & Refill

⁽⁴⁾ 4.0 Qts. (3.8L)

Dry Refill

9.9 Qts. (9.4L)

Differential ⁽⁵⁾

1.0 Qt. (.95L)

Power Steering Fluid ⁽⁶⁾

⁽⁷⁾

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Use an API energy conserving engine oil that is certified for gasoline engines.

⁽³⁾	Quantity includes heater and coolant recovery tank.

⁽⁴⁾

Add this amount of fluid. Start engine and shift transaxle through all gears and back to Park. Add additional fluid to bring fluid level to 1/4" above the bottom hole on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level so fluid level is within the HOT range on dipstick.

⁽⁵⁾	Differential has a separate sump from the automatic transaxle. Use Mopar Fuel Savings 75W-90 petroleum based hypoid gear oil. DO NOT use synthetic gear oil in differential.

⁽⁶⁾	Use only Mopar power steering fluid. DO NOT use automatic transmission fluid.

⁽⁷⁾	Capacity is not available from manufacturer.