Power Window Switch

Remove window switch from door trim panel. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check switch continuity. See appropriate table:
- DRIVER'S WINDOW SWITCH CONTINUITY .
- PASSENGER'S WINDOW SWITCH CONTINUITY .
Replace power window switch as necessary. See Fig 1 or Fig 2 .
Vehicles equipped with Auto Down feature have electronic components in switch to actuate Auto Down. To test, check switch continuity, reconnect switch, turn ignition on and test feature. If Auto Down does not work, replace switch.

Fig 1: Identifying Driver's Window Switch Terminals

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Passenger's Power Window Switch Terminals

Courtesy of CHRYSLER CORP.

DRIVER'S WINDOW SWITCH CONTINUITY

Switch Position

Continuity Between Terminals No.

Off

2 & 5; 3 & 5; 5 & 6; 5 & 11; 5 & 13; 5 & 14

Left Front ⁽¹⁾

4 & 6

Right Front

2 & 5; 3 & 4

Left Rear

4 & 14; 5 & 13

Right Rear

4 & 12; 5 & 11

Down

Left Front ⁽¹⁾

5 & 6

Right Front

2 & 4; 3 & 5

Left Rear

4 & 13; 5 & 14

Right Rear

4 & 11; 5 & 12

Auto-Down

Left Front ⁽¹⁾

---

Power Window Lock-Out

4 & 7

⁽¹⁾	Vehicles equipped with Auto Down feature have electronic components in switch to actuate Auto Down. To test, check switch continuity, reconnect switch, turn ignition on and test feature. If Auto Down does not work, replace switch.

PASSENGER'S WINDOW SWITCH CONTINUITY

Switch Position	Continuity Between Terminals No.
Off	2 & 5; 3 & 6
Up	2 & 5; 3 & 4
Down	3 & 6; 4 & 5