Power Mirror Switch Test
Remove switch and disconnect wiring connector. See POWER MIRROR SWITCH R & I . Using an ohmmeter, check continuity between power mirror switch terminals with switch in appropriate position. See POWER MIRROR SWITCH CONTINUITY TEST table. See Fig 1 . If results differ from table, replace switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Mirror Selector Position | Mirror Angle | Continuity Between Pins No. |
|---|---|---|
| "L" (Left) | Up | 1 & 7; 3 & 8; 4 & 7 |
| Down | 1 & 8; 3 & 7; 4 & 8 | Left |
| 2 & 7; 3 & 8; 5 & 7 | Right | 2 & 8; 3 & 7; 5 & 8 |
| "R" (Right) | Up | 1 & 7; 4 & 7; 6 & 8 |
| Down | 1 & 8; 4 & 8; 6 & 7 | Left |
| 2 & 7; 5 & 7; 6 & 8 | Right | 2 & 8; 5 & 8; 6 & 7 |