Memory Selector Switch

WARNING: This page is about a different car, the 1998 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

Remove memory selector switch. See MEMORY SWITCHES under REMOVAL & INSTALLATION. Using ohmmeter, check continuity between appropriate switch terminals. See MEMORY SELECTOR SWITCH ASSEMBLY TEST table. See Fig 1 . If continuity is not as specified, replace memory selector switch assembly.

MEMORY SELECTOR SWITCH ASSEMBLY TEST

Button Depressed ⁽¹⁾

Continuity Between Pins No.

"1"

6 & 3

"2"

4 & 3

"S"

5 & 3

⁽¹⁾	Without buttons depressed, all circuits are open and no continuity will exist.

Fig 1: Testing Memory Selector Switch

Courtesy of CHRYSLER CORP.