Specifications Index
(MODEL) SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 190 Ft. Lbs. (257 N.m) | ||
| Battery | N/A | ||
| Brakes | N/A | ||
| Charging | N/A | ||
| Drive Belts | |||
| Adjustment | N/A | ||
| Drive Belt Routing | SERPENTINE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | N/A | ||
| Thermostat R & I | ENGINE THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | CYLINDER COMPRESSION TEST | ||
| Oil Pressure | Oil pressure should be 68.9 kPa (10 psi) at idle or 310-517 kPa (45-75 psi) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | N/A | ||
| Fuel System | N/A | ||
| Ignition | N/A | ||
| Spark Plug | N/A | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 80-100 Ft. Lbs. (108-136 N.m) | ||