LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1997 >> Intrepid ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Body Control Computer) >> Self-Diagnostic System >> Test 35B - Courtesy Lamp Output Failure

Test 35B - Courtesy Lamp Output Failure

WARNING: This page is about a different car, the 1996 Eagle Vision, 1996 Dodge Intrepid, 1996 Chrysler New Yorker, 1996 Chrysler LHS, and 1996 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For connector terminal identification and wiring diagrams, see BODY CONTROL COMPUTER  section in this article. Perform TEST VER-1  VERIFICATION TEST after each repair.
  1. Disconnect courtesy lamp at driver's door. Remove fuse No. 13 at junction block. Using external voltmeter, check voltage at courtesy lamp connector terminal No. 1 (Yellow wire). Go to next step.
  2. If voltage is more than 10 volts, repair Yellow wire for short to battery voltage. If voltage is 10 volts or less, replace body control module.
scientia non olet · About LEMON Manuals