Crankshaft Position Sensor: Installation
WARNING: This page is about a different car, the 1996 Plymouth Voyager, 1996 Plymouth Grand Voyager, 1996 Dodge Grand Caravan, and 1996 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
- If reusing crankshaft position sensor, clean old paper spacer from crankshaft end of crankshaft position sensor. Install NEW paper spacer on crankshaft end of crankshaft position sensor. On all crankshaft position sensors, install crankshaft position sensor.
- Push crankshaft position sensor fully downward. Install and tighten bolt to specification while holding crankshaft position sensor downward. See TORQUE SPECIFICATIONS . Install electrical connector.