LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1997 >> Caravan Base, 3.3 R >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> Manual Bleeding

Manual Bleeding

  1. Fill master cylinder. Install clear vinyl bleed hose onto left rear bleed screw. Place other end of hose in clean transparent container.
  2. Partially fill container with clean brake fluid. Submerge end of hose in fluid. Pump pedal 3-4 times and hold. Open bleed screw at least one turn.
  3. Close bleed screw. Release pedal. Repeat procedure until flow of brake fluid is clear and free of bubbles. Proceed to next bleed screw of brake bleeding sequence. See BLEEDING SEQUENCE table.
BLEEDING SEQUENCE

Application Sequence
All Models LR, RF, RR, LF
scientia non olet · About LEMON Manuals