Keyless Entry System - Remote: Description

CAUTION: When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section before disconnecting battery.

The Remote Keyless Entry (RKE) system allows for locking and unlocking of the vehicle doors by remote control, using a hand-held radio transmitter. Additionally on FWD vans, the RKE system activates the pre-programmed power driver's seat and power side mirrors (if equipped).

The RKE module may receive signals from 4 transmitters (only 2 transmitters can be programmed to activate power seat and mirror). Each transmitter has its own code which is stored in RKE module memory. If the transmitter is replaced, code has to be programmed into memory. The receiver (RKE module) is capable of retaining memory even when power is removed. The hand-held transmitter will operate within approximately 23 feet of receiver. The transmitter has 2 replaceable 3-volt batteries.

NOTE: For information on memory seat and mirror systems, see MEMORY SYSTEMS article in the ACCESSORIES/SAFETY EQUIPMENT section.