LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1996 >> Caravan Base, 3.3 R >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Windows) >> Testing >> Power Window Relay Test

Power Window Relay Test

WARNING: This page is about a different car, the 1995 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove power window relay from fuse/relay block located under dash panel at left side of vehicle. See Fig 1 . Check continuity between power window relay terminals No. 1 and No. 3. Continuity should be present.
  2. Connect positive lead of a 12-volt test battery to power window relay terminal No. 1, and negative lead of test battery to terminal No. 3. See Fig 2 . Continuity should be present between terminals No. 4 and No. 5 with voltage applied. Replace power window relay if continuity is not as specified.
Fig 1: Locating Power Window Relay
G95C15323Courtesy of CHRYSLER CORP.
Fig 2: Identifying Power Window Relay Terminals
G95D15324Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals