LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1996 >> Caravan Base, 3.3 R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.3L >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool

Using Scan Tool

  1. Ensure battery is fully charged. Attempt to start engine. Turn ignition off. Connect scan tool to Data Link Connector (DLC), located below driver's side of instrument panel. See Fig 1 .
    Fig 1: Identifying Data Link Connector (DLC)
    G95J35070Courtesy of CHRYSLER CORP.
  2. Turn ignition on. Using scan tool instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to the SELF-DIAGNOSTIC TESTS  . Once all repairs are made, ensure DTCs are cleared from PCM. See CLEARING DIAGNOSTIC TROUBLE CODES  .
scientia non olet · About LEMON Manuals