LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1995 >> Stealth Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Circuit Tests >> DTC 11, 12, 13 Or 14 - Faulty Wheel Speed Sensor Input

DTC 11, 12, 13 Or 14 - Faulty Wheel Speed Sensor Input

NOTE: If after all testing procedures have been completed system is not functioning properly, substitute ECU with known-good unit and retest.
  1. DTC will set if ECU detects wheel speed sensor has no input signal. DTC will also set if wheel sensor voltage input is low while driving vehicle.
  2. Inspect condition of sensor rotor. Damaged rotor teeth can set DTC. Inspect wheel sensor wiring harness for open or poor connection. See WIRING DIAGRAM . Repair or replace if necessary. If no open circuit or poor connection is found, go to next step.
  3. Test wheel speed sensor. See WHEEL SPEED SENSOR TESTING . Replace wheel sensor as necessary. Ensure wheel speed sensor-to-rotor gap is within specification. See WHEEL SPEED SENSOR  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals