Test VER-1B - Verification Procedure
- Ensure ignition is off. Reconnect all previously disconnected components and connectors. Ensure all repairs have been made. Using scan tool, erase DTCs. Go to next step.
- Turn ignition on, engine off. Fully operate system that was malfunctioning by turning switch on, opening door, etc. If system does not operate properly, go to TEST 1A. If system operates properly, go to next step.
- Using scan tool, read body control module DTCs. If any DTCs return, go to TEST 1B. If no DTCs return, repair is complete.
NOTE:
If necessary to diagnose a CCD BUS line malfunction for ABCM, see AIR BAG RESTRAINT SYSTEM
article in the ACCESSORIES/SAFETY EQUIPMENT section.
NOTE:
Some vehicles may not have specific module/system listed in test. If vehicle is not equipped with module/system specified in test step, proceed to next step. For module/system options available, see MODULE APPLICATIONS table below.
MODULE APPLICATIONS
| Module | Body Code |
|---|---|
| Air Bag Control Module (ABCM) | All Models |
| Body Control Module (BCM) | All Models |
| Compass/Mini-Trip Module | All Models |
| Electronic Instrument Cluster (EIC) | All Models |
| Infinity Premium Radio | All Models |
| Mechanical Instrument Cluster (MIC) | All Models |
| 41TE Transmission Control Module (TCM) | All Models |