LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1995 >> Caravan Base, 2.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.3L CNG >> Verification Tests >> Test VER-1 - No Start Verification

Test VER-1 - No Start Verification

  1. Check vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Check engine oil for fuel contamination. If engine oil is contaminated, change oil and filter. Attempt to start engine. If engine does not start, check all related Tech Service Bulletins (TSBs), perform corrective action as necessary, and go to TEST TC-1A.
  2. If engine starts and Powertrain Control Module (PCM) has been replaced, repair is complete. If engine starts and PCM has not been replaced, connect scan tool to data link connector and erase DTCs. Repair is complete.
scientia non olet · About LEMON Manuals