LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1994 >> Stealth Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Testing >> Temperature Gauge >> Sensor Resistance Test

Sensor Resistance Test

  1. Remove Coolant Temperature Sensor (CTS) from engine. See COOLANT TEMPERATURE SENSOR LOCATION . Place sending unit in 158°F (70°C) water. Check sensor resistance using ohmmeter.
  2. CTS resistance should be 90-117 ohms. If CTS resistance is okay, go to GAUGE RESISTANCE TEST below. Replace CTS if resistance is not as specified.
COOLANT TEMPERATURE SENSOR LOCATION

Model Location
Stealth DOHC & 3000GT Thermostat Housing
scientia non olet · About LEMON Manuals