LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1994 >> Stealth Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Testing >> Temperature Gauge >> Circuit Test

Circuit Test

  1. Disconnect temperature sender wire from sending unit. Connect a 12-volt, 3.4-watt test light between connector terminal and ground. Turn ignition switch to ON position.
  2. If test light flashes and temperature gauge needle moves, go to SENSOR RESISTANCE TEST below. If test light does not flash or gauge needle does not move, repair wiring to sending unit.
scientia non olet · About LEMON Manuals