Engine Controls - Specifications - 3.9L: Capacities

BATTERY SPECIFICATIONS

Load Test
(Amps)

⁽¹⁾ CC Rating
@ 0°F (Amps)

⁽²⁾ Reserve Capacity
Rating (Min.)

200

500

110

250-300

600

120

315

685

125

375

750

125

405

810

133

⁽¹⁾	Cold Cranking (CC) rating is current a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2 volts or greater at specified temperature.

⁽²⁾	Reserve capacity rating is length of time a battery can deliver 25 amps and maintain a minimum terminal voltage of 10.5 volts at 80°F (27°C).

FLUID CAPACITIES (RWD & 4WD)

Application

Specification

Automatic Transmission ⁽¹⁾

Estimated Service Refill

Dakota

42RH

5.2 Qts. (4.9L)

Pickup

32RH

5.2 Qts. (4.9L)

42RH

5.2 Qts. (4.9L)

RWD Van

32RH

5.2 Qts. (4.9L)

42RH

5.2 Qts. (4.9L)

Overhaul Refill (Includes Torque Converter) ⁽¹⁾

Dakota

42RH

10.1 Qts. (9.6L)

Pickup

32RH

8.5 Qts. (8.0L)

42RH

10.1 Qts. (9.6L)

RWD Van

32RH

8.6 Qts. (8.1L)

42RH

10.2 Qts. (9.7L)

Cooling System (Includes Recovery Tank)

Dakota

14.0 Qts. (13.2L)

Pickup

20.0 Qts. (18.9L)

RWD Van

14.6 Qts. (13.8L)

Crankcase (Includes Filter)

Dakota

4.5 Qts. (4.3L)

Pickup

4.5 Qts. (4.3L)

RWD Van

4.5 Qts. (4.3L)

Front Axle

Dakota ⁽²⁾

7 1/4"

3.0 Pts. (1.4L)

Pickup ⁽³⁾

Dana 44

5.6 Pts. (2.6L)

Dana 60

6.3 Pts. (3.0L)

Manual Transmission

Dakota

AX-15 Getrag

⁽⁴⁾ 3.3 Qts. (3.1L)

Pickup

⁽⁵⁾ 2.1 Qts. (2.0L)

Power Steering Fluid ⁽⁶⁾

Dakota 2WD

1.7 Pts. (0.8L)

Dakota 4WD

2.5 Pts. (1.2L)

Except Dakota

2.7 Pts. (1.3L)

Power Takeoff (PTO) Adapter

Pickup (NV021)

4.6 Pts. (2.2L)

Rear Axle ⁽⁷⁾

Dakota

7 1/4"

3.0 Pts. (1.4L)

8 1/4"

4.4 Pts. (2.1L)

Pickup ⁽³⁾

7 1/4"

3.0 Pts. (1.4L)

8 1/4"

4.4 Pts. (2.1L)

9 1/4"

4.8 Pts. (2.3L)

Dana 60

6.3 Pts. (3.0L)

Dana 70

6.7 Pts. (3.2L)

Dana 80

6.8 Pts. (3.3L)

RWD Van

8 1/4"

4.4 Pts. (2.1L)

9 1/4"

4.8 Pts. (2.3L)

Dana 60

6.3 Pts. (3.0L)

Transfer Case ⁽⁸⁾

Dakota

NV231

2.5 Pts. (1.2L)

Pickup

NV231

2.5 Pts. (1.2L)

NV241 SD

4.7 Pts. (2.2L)

⁽¹⁾	Use Mopar ATF Plus type 7176 only. Manufacturer does not recommend using Dexron-II.

⁽²⁾	Use SAE 80W-90 with MIL-L-2105C and API GL-4 specification.

⁽³⁾	Use Mopar Thermal stable Multi-Purpose Gear Lubricant SAE 80W-90 with API GL-5 specification.

⁽⁴⁾	Use SAE 75W-90 API GL-5 fluid or equivalent.

⁽⁵⁾	Use Mopar manual transmission fluid P/N 4761526 only.

⁽⁶⁾	Use only Mopar power steering fluid or equivalent. DO NOT use Automatic Transmission Fluid (ATF).

⁽⁷⁾	Use SAE 80W-90 with MIL-L-2105C and API GL-5 specification. Add one container of friction modifier to Trac-Lok or Power-Lok limited slip differential with gear lubricant is changed.

⁽⁸⁾	Mopar ATF Plus type 7176 or Dexron-II.