LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1994 >> Dakota WS, 2.5 G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls - Remove/Install/Overhaul - 5.2L) >> Ignition System >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove spark plug cable loom and spark plug wires from mounting stud on rear of right valve cover. Disconnect hoses from EGR valve. Disconnect connector and hoses at EGR transducer.
  2. Remove EGR valve. Disconnect connector at Oil Pressure Sending (OPS) unit. Using appropriate socket, remove OPS unit. Remove EGR tube. Disconnect crankshaft connector from harness connector. Remove crankshaft position sensor.
scientia non olet · About LEMON Manuals