Fuel Tank: Installation
WARNING: This page is about a different variant/trim than selected.
- Place fuel tank on top of transmission jack, and raise it high enough to connect fuel tubes and fuel gauge wire to fuel pump module. Raise tank into position. Install ground strap (if equipped). Install fuel tank mounting straps and tighten mounting straps. Remove transmission jack.
- Connect vent hoses, filler tube and drain tube cap. Install new hose clamps, and tighten clamps securely. Connect fuel line if disconnected earlier. Refill tank, and inspect all hoses and lines for leaks. Reconnect negative battery cable. Pressurize system, and check for leaks.