Speed (Cruise) Control Switch
Disconnect speed control switch 4-pin connector. Using an ohmmeter, check for continuity at speed control switch. See Fig 1 . If continuity is not as specified in SPEED CONTROL SWITCH CONTINUITY , replace defective speed control switch.
SPEED CONTROL SWITCH CONTINUITY
| Switch Position | Check Between Terminals no. | Continuity |
|---|---|---|
| OFF | 1 & 4 | Yes |
| ON | 1 & 4 | Yes |
| ON | 1 & 2 | Yes |
| ON | 2 & 4 | Yes |
| ON & SET | 1 & 2 | Yes |
| ON & RESUME | 1 & 3 | Yes |