Test VER-1B - Verification Procedure
Ensure ignition is off. Reconnect all previously disconnected components and connectors. Ensure all repairs have been made. Turn ignition on. Actuate system that was not operational. If system operates properly, repair is complete. If system does not operate properly, go to TEST 1A.
NOTE:
Some vehicles may not have specific module/system listed in test. If vehicle is not equipped with module/system specified in test step, proceed to next step. For module/system options available, see MODULE APPLICATIONS table.
MODULE APPLICATIONS
| Modules | Body | ||
|---|---|---|---|
| Automatic Temperature Control (ATC) (1) | ZJ | ||
| Body Control Module (BCM) | AS | ||
| Controller, Anti-Lock Brake (CAB) | XJ, YJ, ZJ | ||
| Compass/Temperature Monitor | AS, ZJ | ||
| Electronic Instrument Cluster (EIC) | AS | ||
| Mechanical Instrument Cluster (MIC) | AS | ||
| Powertrain Control Module (PCM) | AS, XJ, YJ, ZJ | ||
| Transmission Control Module (TCM) | AS | ||
| Vehicle Theft Security System (VTSS) | XJ, ZJ | ||
|
|||