Window Switch Continuity Test
Remove switch from mounting position. See WINDOW SWITCH R & I under REMOVAL & INSTALLATION. Using an ohmmeter, determine correct continuity. See MASTER WINDOW SWITCH POSITION CONTINUITY TEST or PASSENGER DOOR WINDOW SWITCH POSITION CONTINUITY TEST . If there is no continuity at any one of the switch positions, replace switch. See Fig 1 or Fig 2 .
MASTER WINDOW SWITCH POSITION CONTINUITY TEST
| Switch Position | Continuity Between Pins No. | |
|---|---|---|
| Off | 1-2, 2-3, 2-4, 2-6 | |
| Up | ||
| Driver Side | 3-5, 2-6 | |
| Passenger Side | 1-5, 2-4 | |
| Down | ||
| Driver Side | 5-6, 2-3 | |
| Passenger Side | 1-2, 4-5 | |
PASSENGER DOOR WINDOW SWITCH POSITION CONTINUITY TEST
| Switch Position | Continuity Between Pins No. |
|---|---|
| OFF | 1-4, 2-5 |
| A | 3-4, 2-5 |
| B | 2-3, 1-4 |