Actuator Test Mode

Actuator test mode is used to check operation of output circuits of devices the SBEC cannot recognize. The following can be activated in actuator test mode to ensure component operation: relays, solenoids and various components. The following are information or components that may be accessed through actuator test mode.

• A/C Clutch Relay
• All Solenoid/Relays
• ASD (Alternator Field)
• ASD (Auto Shutdown) Relay
• ASD (Auto Shutdown) System
• Intake Manifold Heater Relay No. 1
• Intake Manifold Heater Relay No. 2
• Overdrive Solenoid
• Stop All Tests
• Tachometer Output