Engine Controls - Specifications - Diesel: Capacities

BATTERY SPECIFICATIONS

Application	Cold Cranking Amperage
All Models	1075

FLUID CAPACITIES ⁽¹⁾

Application

Quantity

Cooling System (Includes Heater) ⁽²⁾

A/T

16.5 Qts. (15.7L)

M/T

15.5 Qts. (14.7L)

Crankcase (Includes Filter) ⁽³⁾

12.0 Qts. (11.4L)

Automatic Transmission (Dexron-II) ⁽⁴⁾

37RH & 46RH

11.0 Qts. (10.4L)

Manual Transmission (SAE 5W-30 API SG Or SG/CD)

G360

3.5 Qts. (3.3L)

Power Steering

2.7 Pts. (1.3L)

Transfer Case ⁽⁵⁾ (NP205)

4.5 Pts. (2.1L)

Front Axle ⁽⁵⁾

6.5 Pts. (3.1L)

Rear Axle ⁽⁵⁾

7.0 Pts. (3.3L)

⁽¹⁾	All capacities are approximate.

⁽²⁾	Add 1 qt. (.95L) for coolant recovery tank.

⁽³⁾	Engine oil must meet API rating of CC/CD-SF, CD/SF, CE/SF or CE/SG. Use 15W-40 weight oil for temperatures exceeding 10°F (-12°C) and 10W-30 for temperature less than 10°F (-12°C). Maximum sulfated ash content of 1.85% is recommended. DO NOT use single grade oil.

⁽⁴⁾	Torque converters do not have drain plugs. DO NOT attempt to install drain plug. Add approximate amount of fluid and check fluid level several times while filling, and add fluid if necessary. Capacity is only approximate.

⁽⁵⁾	Use gear oil with API rating of GL-5. Use SAE 140 for temperatures greater than 90°F (32°C). Use SAE 90 for temperatures between -10°F (-23°C) and 90°F (32°C). Use SAE 80 for temperatures less than -10°F (-23°C).