Dr-1: Testing For Fault Codes
Using DRB-II, check for fault codes. Identify fault code and perform test as specified. See FAULT CODE DIRECTORY table. If DRB-II displays more than one code, repairs should be made starting with the lowest fault code. If a driveability problem exists but no codes are displayed, perform TEST DR-21. If DRB-II displays a blank screen or NO RESPONSE, refer to TEST DRB-I at end of self-diagnostic tests.
FAULT CODE DIRECTORY
| Code | Definition | Test |
|---|---|---|
| 11 | Oxygen Sensor | DR-2 |
| 12 | Airflow Sensor | DR-3 |
| 13 | Air Temperature Sensor | DR-4 |
| 14 | Throttle Position Sensor | DR-5 |
| 21 | Coolant Temperature Sensor | DR-6 |
| 22 | Crank Angle Sensor | DR-7 |
| 23 | Cylinder Sensor (TDC) | DR-8 |
| 24 | Vehicle Speed Sensor | DR-9 |
| 25 | Barometric Pressure Sensor | DR-10 |
| 31 | Knock Sensor | DR-11 |
| 39 | Oxygen Sensor 2 | DR-12 |
| 41 | Injector (Non-Turbo) | DR-13 |
| 41 | Injector (Turbo) | DR-14 |
| 43 | EGR System | DR-15 |
| 44 | Ignition Signal | DR-16 |
| 45 | Ignition Signal 2 | DR-17 |
| 46 | Ignition Signal 3 | DR-18 |
| 61 | Transaxle-To-ECU Comm. Wires | DR-19 |
| 62 | Variable Induction Control System | DR-20 |