Wipers Do Not Run Continually When Wash Is In The DELAY Mode
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1990 Dodge Dynasty, 1990 Dodge Daytona, 1990 Chrysler New Yorker Fifth Avenue, 1990 Chrysler New Yorker, and 1990 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect Black 25-pin connector from body computer located behind right kick panel. Using a voltmeter, connect positive lead to pin No. 10 and negative lead to metal case of body computer.
- Set delay switch to DELAY position. Depress wash switch. If voltage reading is zero volts, check switch relay and wiring. If voltage reading is 10-15 volts, replace body computer.