LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1990 >> Caravan Base, 2.5 K, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator - Except BOSCH >> Diagnostic Testing >> Battery Temperature Sensor Calibration Check

Battery Temperature Sensor Calibration Check

  1. This checks battery temperature sensor. Connect DRB-II to engine harness connector, Sensor Test Mode 01. Display reading on DRB-II should be between .2-3.0 volts.
  2. Check for battery drain-down condition. Put the system in Engine Running Test Mode 61. Divide reading on display by 10. Display on DRB-II should be 2-5 volts. If not as specified, replace SMEC.