LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1988 >> Lancer Base, 2.2 D, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Low-Reverse Band (Rear)

Low-Reverse Band (Rear)

Low-Reverse band adjusting screw is located on rear servo lever. Transmission oil pan must be removed to provide access to band adjusting screw. See Fig 1 .

Fig 1: Low-Reverse Band Adjustment (Rear) Screw Location
G35234
  1. Drain transmission and remove oil pan. Loosen band adjusting screw lock nut about 5 turns. Ensure adjusting screw turns freely in case. Tighten adjusting screw to 41 INCH lbs. (4.6 N.m).
  2. Back off adjusting screw specified number of turns given in LOW-REVERSE BAND ADJUSTMENT  . Hold in this position and tighten lock nut to 10 ft. lbs. (14 N.m.). Install oil pan and fill transmission with fluid.
    LOW-REVERSE BAND ADJUSTMENT

    Application Back Off Screw
    A-413 3 1/2 Turns
scientia non olet · About LEMON Manuals