LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1987 >> Charger Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Removal & Installation >> Fuel Pressure Dampener >> Installation

Fuel Pressure Dampener: Installation

  1. Before installing an injector the rubber "O" ring must be lubricated with a drop of clean engine oil to aid in installation. Install injector top end into fuel rail receiver cup. Be careful not to damage "O" ring during installation.
  2. Install injector clip by sliding open end into top slot of the injector and onto the receiver cup ridge into the side slots of clip. To installation, reverse removal procedure.
scientia non olet · About LEMON Manuals