LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1984 >> Ramcharger AW150, 5.2 T, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Motor Switch >> RWD Models

RWD Models

  1. Connect one lead of jumper wire to battery lead and other end of lead to "UP" terminal of left multiple connector. See Figure . Connect a second jumper wire with one lead to "DOWN" terminal of switch. Attach other end of lead to ground terminal. Connect 2 jumper wires to right motor switch connector to operate switch.
  2. If motor operates, voltage to motor is okay. Install switch to multiple connector and operate switch. If motor fails to operate, replace switch body. Test each switch.
  3. Connect one lead of jumper wire to battery terminal and other end of lead to "DOWN" terminal of switch. See Figure . Connect a second jumper wire with one lead to "UP" terminal and other lead to ground terminal. Connect 2 jumper wires to right motor switch connector to operate switch.
  4. Test results are the same as in step 2). If motor fails to run, perform Lift Motor Test.
scientia non olet · About LEMON Manuals