LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1983 >> Rampage Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> 1.6L & 2.2L EFC System >> Removal & Installation >> Spark Control Computer >> Removal & Installation

Removal & Installation

  1. Remove battery. Disconnect 10-wire and 12-wire connectors from computer. Remove outside air duct from computer. Disconnect vacuum hose from vacuum transducer.
  2. Remove 3 mounting screws that hold computer to fenderwell and remove computer. To install, reverse removal procedure.
NOTE: Computer is not serviceable. DO NOT  attempt disassembly for any reason. If vacuum transducer is defective, entire computer must be replaced.
scientia non olet · About LEMON Manuals