LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1982 >> Cab & Chassis D250, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Electronic Ignition >> Testing >> Electronic Control Unit Ground Circuit

Electronic Control Unit Ground Circuit

  1. Connect one ohmmeter lead to a good ground and other lead to control unit connector pin 5 (not cavity 5 of harness connector). Ohmmeter should show full continuity.
  2. If not, make sure control unit is making good contact with ground at hold-down bolts. If contact with ground is good, replace control unit.
scientia non olet · About LEMON Manuals