LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1980 >> Colt Custom, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Feedback Carburetor >> Maintenance >> Oxygen Sensor >> Electronic Switch Reset

Electronic Switch Reset

  1. Locate green plastic case behind instrument panel in lower left cluster area. Slide case off bracket and open cover.
    NOTE: Vehicle battery MUST be connected while resetting switch.
  2. Remove 9 volt battery and insert small rod or screwdriver into hole in switch, closing contacts. Replace battery with a new 9 volt alkaline battery, close case, and slide switch back onto bracket.
scientia non olet · About LEMON Manuals